PDA

View Full Version : C6501 intermitant jams J-9301 and bent corners


Custom Search


methogod
02-20-2013, 09:11 PM
same issue or different problem??? 12x18 where the paper tare's is usualy in the same place, swaped fusers still happening.

almost 1.8m on the meter, well taken care of.. hard to see where the tare is happening, we have tried to stop it while running but hard to do...

195731957419575

methogod
02-21-2013, 12:40 AM
Come on people any ideas at the acct in the AM...

eifling
02-21-2013, 06:34 PM
Come on people any ideas at the acct in the AM...

What kind of finisher? Does it do it going into subtray? Looks like its after fuser.

JustManuals
02-21-2013, 08:10 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

methogod
02-21-2013, 08:23 PM
Took off RU and SD etc..

final found it catching on exit wheels (black and white ones)...

took off 2-3 on that side, no more nicks/dog ears...

now trying to figure out 9301...

pappyvonsillypants
02-22-2013, 04:54 PM
for the 93-01 i would try swapping the motors in the adu. or it could possibly be a sensor in the adu as well not flagging. its a mess swapping out the motors but it will provide a great test.

methogod
02-22-2013, 05:03 PM
we swaped motors and replaced a sensors ---

what code will show after swaping motors...

Custom Search