View Full Version : Xerox 5320
hood4472
11-04-2005, 11:31 PM
I have smudges or a little blurry print on paper. Replaced the separation/trans corona wires. Developer unit seems to turn ok and can not locate identical problem on the mag roller. Any help would be appreciated.
Robin
i don\'t know these machines very well, but i would suggest checking your opc/drum cartridge closely. make sure belt turns well and doesn\'t slip at all. thats about all the help i can give you on this machine.
good luck,
ray
i don\'t know these machines very well, but i would suggest checking your opc/drum cartridge closely. make sure belt turns well and doesn\'t slip at all. thats about all the help i can give you on this machine.
good luck,
ray
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.