PDA

View Full Version : bizhub 363


Custom Search


Barış KURT
02-27-2013, 07:02 PM
hi
how we are enter service mode bizhub 363.default pass 92729272 not allow.Or how to reset set default.
best regards.

fixthecopier
02-27-2013, 09:58 PM
hi
how we are enter service mode bizhub 363.default pass 92729272 not allow.Or how to reset set default.
best regards.

If you are tying to get into service, buy a manual, you will need it when you get there.

EarthKmTech
02-27-2013, 10:56 PM
if the CE password's been changed and set to ON and you dont know what it is and you've taken over the machine servicing, you will need to initialize the nvram. I'm not sure of any other way of resetting it. You may want to contact the KM help desk as i doubt the manual will help you with this.

JustManuals
02-28-2013, 04:34 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search