D Colour
03-14-2013, 06:31 PM
We have the Olivetti version of this machine (D Color MF201). The customer wanted to be able to scan, which because of the current firmware level, this machine could not do.
The machine had Firmware Version 4 installed and there was about 15 upgrades to be applied to get it up to the current level.
After attempting to update to ver 5/6 (the first step!) the machine now does not warm up. It powers on, in so much that the power led on the control panel lights up, but the screen remains black.
Is there a way to try and reload the firmware if it has not upgraded properly?
Thanks
James
The machine had Firmware Version 4 installed and there was about 15 upgrades to be applied to get it up to the current level.
After attempting to update to ver 5/6 (the first step!) the machine now does not warm up. It powers on, in so much that the power led on the control panel lights up, but the screen remains black.
Is there a way to try and reload the firmware if it has not upgraded properly?
Thanks
James