PDA

View Full Version : fs 524 that fits on a bizhub 601 problem


Custom Search


brent
03-18-2013, 11:53 PM
the call was only jams when we staple. turns out the staple unit (rear) cartridge was plum stuck. it will not come out. so I had to get it out. unfortuantly. but I am pretty sure they tried and pryed it. I ordered a new staple unit and carrier. is this a common occurance? I am pretty dissapointed with this unit. I have never not been able to dissasemble a staple cartridge. any one else had any experience with this particular unit>?
brent

blackcat4866
03-19-2013, 12:27 AM
It's not uncommon for this kind of stapler to get out-of-time when a staple jam has occurred. To get to the staple jam you must manually turn the stapler motor until the stapler jaw reaches the top of it's throw, then the staple cartridge will come out.

The good news is that the flesh on your fingertips does grow back ... eventually. =^..^=

brent
03-19-2013, 02:27 AM
maybe that was the problem at first. but the staples were so jammed that I need to take the staple unit out now

Custom Search