PDA

View Full Version : Di450 C13FA code


Custom Search


krm
03-20-2013, 03:27 AM
I'm thinking the print head is failing. Code comes and goes. I reset all connectors to pwb-b and removed the thumb screws securing PH. Does any one remember the LD1 - LD2 adjustments for this code? Do you lower or higher the values? Will this or other solution rectify this code? Or is the PH needing replacement?
Thanks for your input.

JustManuals
03-20-2013, 05:18 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Darren King
03-20-2013, 06:18 PM
Service bulletin says to lower both LD1 and 2 by 10

krm
03-21-2013, 03:46 AM
Service bulletin says to lower both LD1 and 2 by 10
Thank you Darren! I could not remember and the service manual is lacking on explaining this adjustment. It is worth a try before replacing the PH. That thing is pricey.
Thanks.

Custom Search