Zeldaman
03-26-2013, 06:37 PM
Hi there!
Had a nice little problem: copies from tray 1, jam after 5-15 copies. Rollers: OK ,sensors: OK, clutches: OK. Bypass with A4sef: OK, checking tray 2, the same. Tray3&4, with A4lef & A3 running good. Tray 3&4 with A4sef jam. After cleaning sensors, checking guideplates i changed the paperfeed-cl with the timing-cl and the b...h was running well! What surprised me was that the timing-cl looks like a new one, but the feed-cl was rusty. It's seems that the clutches become more & more pita , never mind the manufacturer.
Greetings...
Had a nice little problem: copies from tray 1, jam after 5-15 copies. Rollers: OK ,sensors: OK, clutches: OK. Bypass with A4sef: OK, checking tray 2, the same. Tray3&4, with A4lef & A3 running good. Tray 3&4 with A4sef jam. After cleaning sensors, checking guideplates i changed the paperfeed-cl with the timing-cl and the b...h was running well! What surprised me was that the timing-cl looks like a new one, but the feed-cl was rusty. It's seems that the clutches become more & more pita , never mind the manufacturer.
Greetings...