Copytechnet.com
>
Technical Forums
>
Copier Technical Discussion
>
Canon
> canon DADF-C1
PDA
View Full Version :
canon DADF-C1
Custom Search
imagertech
12-03-2005, 12:00 AM
when duplexing the doc stop postion is correct for side one but after the turn the stop position is 1 inch too far. the book explains stop position but for single sided only any help?
Custom Search
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.