PDA

View Full Version : Konica Minolta Magicolor Black IU not Resetting


Custom Search


Datatek
04-02-2013, 10:44 PM
Ok, I installed a NEW OEM Black IU Unit and the machine tells me to check and install Black IU.

Any suggestions.

I did turn on/off and it didnt fix the problem!

Thanks for the Help!

Darren King
04-02-2013, 11:36 PM
Kinda hard to give good advice without a model, but, check to see if the chip is on the IU. If there, clean it and the contact in the machine.
Darren

JustManuals
04-03-2013, 12:11 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search