View Full Version : Konica Minolta Magicolor Black IU not Resetting
Datatek
04-02-2013, 10:44 PM
Ok, I installed a NEW OEM Black IU Unit and the machine tells me to check and install Black IU.
Any suggestions.
I did turn on/off and it didnt fix the problem!
Thanks for the Help!
Darren King
04-02-2013, 11:36 PM
Kinda hard to give good advice without a model, but, check to see if the chip is on the IU. If there, clean it and the contact in the machine.
Darren
JustManuals
04-03-2013, 12:11 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.