PDA

View Full Version : Jamming Konica Bizhub Pro C-6500... J-3209 Jams


Custom Search


Doug James
04-05-2013, 01:03 AM
I have been fighting this all day. What happens is when the paper exits the fuser it is not going down then up to the finisher. It jams just when it starts to head to the finisher, right when the motor turns the oppisite direction (Clear of the fuser) Any help would be so appreciated. I am ready to shoot this thing...

Mick01
04-05-2013, 02:24 AM
Hi,
This could be caused by the black sensor actuator worn down (65AA51311)

RRodgers
04-05-2013, 02:24 AM
Hi,
This could be caused by the black sensor actuator worn down (65AA51311)
Yep, that's what it is.

Doug James
04-05-2013, 02:39 AM
COOL... Thanks you guys, sure makes alot of sense. Going back saturday to fight with it some more.
You guys are GREAT... Thanks so much...

RRodgers
04-05-2013, 03:00 AM
COOL... Thanks you guys, sure makes alot of sense. Going back saturday to fight with it some more.
You guys are GREAT... Thanks so much...

Put a dab of super glue on the tip to build it up some. (usually helps for me)

Mick01
04-05-2013, 03:36 AM
You are most welcome, happy to assist

Doug James
04-06-2013, 11:58 PM
Looks like the motor (Below the actuator you mentioned) wasn't working. Hoping it's just the motor and not the main board....

Custom Search