View Full Version : CQ Bizhub C35 Image Problems
Teqorious
04-12-2013, 03:40 PM
Hi,
When I print on a Bizhub C35 it looks like the attached file.
I have changed MFP, PRCB, drivers, firmware, transferbelt.
Have anyone some idea what is wrong?
Shadow
04-12-2013, 04:57 PM
have you performed the colour adjustments?
drimouxlas
04-12-2013, 05:31 PM
Try to clean the laser lens with the tool provided (1st papertray) and then try a gradation adj...
JustManuals
04-12-2013, 07:46 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Teqorious
04-18-2013, 10:43 AM
Try to clean the laser lens with the tool provided (1st papertray) and then try a gradation adj...
Tried this and it is still the same.
Teqorious
04-18-2013, 10:44 AM
have you performed the colour adjustments?
Yes and it is still the same....:(
mo0651
04-18-2013, 01:55 PM
What does the Internal demo page look like?
minimerlin
04-18-2013, 07:54 PM
How old are the consumables? Did the fault suddenly occur? What application are you printing the photo from?
Mr Spock
04-18-2013, 11:37 PM
What paper are you using? I have seen this when using the ps driver from certain apps (picture viewer) but prints fine on pcl driver.
Teqorious
04-22-2013, 08:24 AM
What does the Internal demo page look like?
Can't find internal demo page to print.
I have only print test pattern and all the colour looks great.
Teqorious
04-22-2013, 08:58 AM
What paper are you using? I have seen this when using the ps driver from certain apps (picture viewer) but prints fine on pcl driver.
The paper is standard 80gr.
The customer using PCL driver and I have tested with a new PCL driver and from my computer. They print from a specialprogram but I print from USB memory and PDF, JPG files (tried different PDF and JPG files).
Cartaos
04-22-2013, 09:13 AM
IDC Sernsor in correct position?
Teqorious
04-22-2013, 10:38 AM
IDC Sernsor in correct position?
Changed the sensor and checked the position but it is still the same.
Teqorious
04-22-2013, 10:47 AM
How old are the consumables? Did the fault suddenly occur? What application are you printing the photo from?
The consumables are not very old, a couple of month.
Printing from external USB and PDF, JPG.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.