ybnews
04-12-2013, 08:16 PM
I was getting a small black line across the middle of all copies so I removed the image film belt and fuser unit, cleaned them off and re-installed. Now the bottom 3 1/2" of the page are blank. No image on the bottom third on the operators side no matter what size paper I use. What'd I do?
I've pulled them both back and re-inserted many times to no avail.
Any suggestion on what went wrong or What to look for?
Thank you for your attention.
Dana Lewis
I've pulled them both back and re-inserted many times to no avail.
Any suggestion on what went wrong or What to look for?
Thank you for your attention.
Dana Lewis