C-C164 on a KonicaMinolta C552

[jrf]

I have a KMC552 with code c-c164 (wrong ROM data)
The machine will not load firmware from USB or nov ram recovery tool.
Any ideas please

[Mr Spock]

try disconnecting all the options and see if it still does it. If not then plug in one at a time until it errors out. Then replace the driver pwb for that option.
Otherwise you are looking at OACB or nvram. Nvram can only be order through SSD with an open ticket and management approval.

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

[jrf]

Just to let you know there was a bad connection from the sensor which gets interrupted when the cover plate of the service port is raised and this was stopping it booting from the Usb.