biz hub c 252/fs 603

[copierlady]

Hey guys,
i have a fs603 in my shop trying to hook it up to a biz hub c252. This is a match right? The plugs dont seem to match. Can the little square connectors be removed or broken out from the plugs? There are several rows missing on the copier side.

[NRTech]

This should fit and work. There should be 2 connectors from the finisher, the big one goes to the copier, the little one goes to the horizontal transport unit.

[copierlady]

The fs603 connection for the c252 is not the proper plug. Is there a conversion kit?

[dallas]

If I remember right, you need the another Cover/Connector, Wire Harness and Firmware.