PDA

View Full Version : Konica Minolta c224


Custom Search


macuk
04-18-2013, 09:26 PM
New machine, 3 weeks old. Skewing from tray 2 only, by 2mm+. I have swapped tyres, cleaned guide and mylar with no success. seems improved if front is side door is pushed in. Don't have experience on this machine. Can anyone suggest how to improve the skew?

Itsthepaper
04-19-2013, 02:10 AM
I would make sure the side door is not skewed, check the hinges. I did go to training on that machine and the door could cause problems with skew if it's not sitting straight on the machine.

JustManuals
04-19-2013, 12:40 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

SmellsHot
04-19-2013, 12:45 PM
In the right side door, where paper comes out of the tray. There is a clear plastic guide. It locks in on each end. I've had a few machines, where one of the sides would pop out of place and cause skewing.

Custom Search