PDA

View Full Version : bizhub 350 Admin Password


Custom Search


backspace
04-21-2013, 01:36 PM
Hi,
I am buy bizhub 350 and tray little repair and sell and everything is OK except admin password. I need set IP adress.
I am servis of Konica Minolta but in SM no procedure for disabling admin pass.

I just found this in SM dipSW MODE 024

Bit Feature
Logic
Description
0 1
5 Display Administrator/
User passwords.
Yes No.
20474

any other option

sorry on my bad english!

TheOwl
04-21-2013, 11:18 PM
By default, the Admin password for Konica Minolta device is 0000 or 00000000 or 12345678

The DIP SW you are referring to turns off or on the hashing out of passwords when they are entered so that you can see the password rather than *'s.

Once in Tech Rep Mode, you will then need to go into Security Mode (don't ask me where that is because you have the service manual) and you will then find the Administrator Password.

emujo
04-22-2013, 04:27 PM
Here it is..copied right from our 350 in the demo room "********" hope this helps..Emujo

TheOwl
04-22-2013, 11:16 PM
Here it is..copied right from our 350 in the demo room "********" hope this helps..Emujo

You must have fiddled with a DIP SW to get that...

Custom Search