PDA

View Full Version : C500 voids on all colors after PM.


Custom Search


Operator Error
02-06-2008, 08:40 PM
When I run the test mode and print halftones all colors have void spots throughtout the page. Changing out the developer unit fixes the issue but on next pm problem comes up again. Solids are horibble I've changed out filters and tested cooling fans. Any suggestions Thanks

random
02-07-2008, 05:46 AM
Clean optics perform gamma sensor calibration.

mikeena
02-07-2008, 07:00 PM
do you have any samples of this issue i would like to see them also what is the meter count at

Custom Search