PDA

View Full Version : Dead Machine bizhub C6500 with C- 5003


Custom Search


Darius
04-26-2013, 08:07 AM
any udeeas? any solutions?
Thanks

Gaffers01
04-26-2013, 10:25 AM
I havent come across this error code before but this is what it says in the manual.

Communication
abnormality

C-5003 Conveyance drive board (CDB)
24VDC abnormality.
Abnormality signal of 24VDC for
CVD was detected.
DC power unit/2 (DCPS/2)
Conveyance drive board
(CDB)

Have you changed any boards or had any boards out, as i would check all connectors are plugged in.

Darius
04-26-2013, 10:41 AM
I havent come across this error code before but this is what it says in the manual.

Communication
abnormality

C-5003 Conveyance drive board (CDB)
24VDC abnormality.
Abnormality signal of 24VDC for
CVD was detected.
DC power unit/2 (DCPS/2)
Conveyance drive board
(CDB)

Have you changed any boards or had any boards out, as i would check all connectors are plugged in.

I pulled out the fuser unit and start with door open. i receive C-2221!!!!

Mick01
04-29-2013, 12:39 AM
It appears you have an issue with the 24v line. Check you are getting 24v output from the DC power supply. Check you are getting 24v output from PRCB. Check ICP's on PRCB and CDB. Try running motors in I/O mode

JustManuals
04-29-2013, 02:09 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
I also have the frimware and the NVRAM Recovery Tool.

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search