PDA

View Full Version : bizhub 500 ADF problem


Custom Search


mohsen3310
04-27-2013, 04:18 PM
the bizhub 500 no detect document in ADF tray.
i check the ADF sensors on sensor check mode code 60 all sub code is work
when i put the document in ADF tray polygon motor turn rotate on but after press start key then scan from glass
when adf door is open that say close the door.
every thing is ok but no fading from ADF

please help me
thanks

JustManuals
04-27-2013, 06:02 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

fixthecopier
04-27-2013, 10:24 PM
Check the actuator that the adf depresses to tell the machine it is up or down. Sometimes they get stuck in the down position. What about the actuator that detects the paper document is there?

mohsen3310
04-28-2013, 11:27 AM
i check all sensor of ADF
PS5 on ADF (original empty sensor)
PS7 on ADF (cover open)
SW3 on main body (DF open)
all is ok

Custom Search