PDA

View Full Version : Lexmark Optra T610 with marks on pages


Custom Search


Jim Isbell
02-07-2008, 10:04 PM
There is a regular gray mark appearing regularly on the page about every 3 and a half inches. Sounds like the circumference of a roller. Which one is that size in circumference?

blackcat4866
02-07-2008, 10:07 PM
Here's my formula:

Circumference/PI=diameter

3.5/3.14159265 = 1.1140846"

It could be a drum or a fuser roller, but probably fuser.

Jim Isbell
02-07-2008, 10:43 PM
Thanks, I will check that and see if a cleaning will do the trick.

lkrsardis
02-07-2008, 11:14 PM
try removing and cleaning the charge roller and transfer roller with a damp rag.

Jim Isbell
02-07-2008, 11:53 PM
Thanks.

Jim Isbell
02-08-2008, 12:53 AM
You wouldnt happen to know the part numbers of the charge roller and the transfer roller?

blackcat4866
02-08-2008, 03:07 AM
Transfer Roller Part#: 99A0179 or 99A1015

The Primary Charge Roller is part of the laser cartridge.

Neither one of those rollers is 1 1/8" in diameter though. Not even close. Cleaning will certainly do no harm, though.

Jim Isbell
02-08-2008, 03:12 AM
Then in the case of one of them, changing the toner cartridge would eliminate the problem. If that doesn't cure it then it at least narrows down the field. Thanks. I think that will help me a lot.

Jim Isbell
02-08-2008, 03:14 AM
OOPs, no, I miss read your post. You said the Laser Cartridge, not the Toner cartridge. As Gilda used to say......Nevermind...........

blackcat4866
02-10-2008, 02:03 AM
Sorry, for me laser cartridge = toner cartidge. Yes, that would rule out out the primary charge roller.

Jim Isbell
02-10-2008, 02:27 AM
Great. Because I purchased up a repair kit that has the transfer roller in it...hasn't gotten here yet....and I have several new toner cartridges so as soon as the transfer roller gets here I should be able to test BOTH of them for the problem. And probably cure it.

Thanks for all the help. I will report back as soon as its fixed as to what the problem was.

Jim Isbell
02-15-2008, 08:23 PM
A new toner cartridge solved the problem.

Now, anyone know where I can download a manual for the Optra T610? I need the information on what the various menus do etc.

blackcat4866
02-16-2008, 03:40 AM
Include an email address in a private message and I'll send it to you monday.

Jim Isbell
03-14-2008, 04:36 AM
Thanks to everyone. I got the Manual, and the printer was fixed by the replacement of the toner cartridge. Nothing else needed.

Thanks again.

Custom Search