View Full Version : PF-P08 Tray onto C35 Question
CraigW
05-01-2013, 06:31 PM
Is it supposed to have holding brackets that fasten it to machine ??? It is made for them.... but do not have any on a recent machine set-up.
SmellsHot
05-01-2013, 08:22 PM
It should have them, but they are not necessary for machine to function....
CraigW
05-01-2013, 08:32 PM
I found a installation sheet for the plain base we put on a C35 and it had brackets.
blackcat4866
05-01-2013, 11:43 PM
I found a installation sheet for the plain base we put on a C35 and it had brackets.
Yes, you get a full set of brackets with the cabinet. =^..^=
CraigW
05-02-2013, 01:16 PM
Yes, you get a full set of brackets with the cabinet. =^..^= Are they supposed to be included with the PF-P08 unit ?? Thanks,
blackcat4866
05-03-2013, 12:25 AM
Are they supposed to be included with the PF-P08 unit ?? Thanks,
I don't know about "supposed to", but they are not. =^..^=
CraigW
05-03-2013, 01:26 PM
Thank you much, Instructions are vague at best. I always try to look the packing over closely. I modified a set from an old 350 to work. CW
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.