View Full Version : Aficio SPC242 / SC543
AleLeader
05-02-2013, 05:47 PM
I have SPC242 with code SC543
For reset code, i have service manual but not search solution
arahael
05-02-2013, 06:57 PM
go in service mode>engine maintenance> fuser sc reset
to go service mode dont hold <c> but tap once
AleLeader
05-02-2013, 08:14 PM
Instruction for service mode>engine maintenance because i can not found
go in service mode>engine maintenance> fuser sc reset
to go service mode dont hold <c> but tap once
TonerMunkeh
05-02-2013, 08:19 PM
Red 1 0 7 Green
xtarabash
07-09-2013, 04:14 PM
Red 1 0 7 Green
Hi, this printer does not have the keys "red 107 green"
What is the right procedure for entering mantenance mode?!?
Thanks a lot ^__^
Iowatech
07-10-2013, 02:36 AM
It's actually very easy to find the reset for this error code in the manual.
TonerMunkeh
07-10-2013, 05:55 PM
Hi, this printer does not have the keys "red 107 green"
What is the right procedure for entering mantenance mode?!?
Thanks a lot ^__^
【图】彩色激光一体机 理光SP C242SF新品上市 - 办公频道 图片欣赏— IT168 (http://oa.it168.com/picshow/index959030.shtml)
Red clear / stop key, 107, green colour start copy key.
Apologies for the screwed up hyperlink, it's in foreign but it shows the ops panel clearly.
Sharpshooter
05-20-2014, 09:46 AM
Hi,
I have a customer who gets Communication error 200082 everytime she gets a fax from a special sender. What does it mean?
slimslob
05-20-2014, 04:42 PM
Hi,
I have a customer who gets Communication error 200082 everytime she gets a fax from a special sender. What does it mean?
If the future, please do not hijack a post started by someone else. Just start a new post.
Hi
To get survice mode with the printer model
Hold keys ( start/stop and escape) then power on
fshead
02-17-2019, 07:12 PM
Hi,
I have a customer who gets Communication error 200082 everytime she gets a fax from a special sender. What does it mean?
it means they have a special sender
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.