marlon29
05-09-2013, 03:08 AM
hi guys,
has anyone encountered this problem: front and back registration is not good. The shift of the cutting marks on the back side is almost 3mm when running. I can exactly shoot the 2 corners, upper left and lower right, but the two sides does not fall correctly. This problem occurs for large paper sizes especially SRA3.
I have replaced already the registration unit but not good.
Anyone encountered this problem?
Thanks,
Marlon
has anyone encountered this problem: front and back registration is not good. The shift of the cutting marks on the back side is almost 3mm when running. I can exactly shoot the 2 corners, upper left and lower right, but the two sides does not fall correctly. This problem occurs for large paper sizes especially SRA3.
I have replaced already the registration unit but not good.
Anyone encountered this problem?
Thanks,
Marlon