View Full Version : front and back registration

Custom Search

05-09-2013, 04:08 AM
hi guys,

has anyone encountered this problem: front and back registration is not good. The shift of the cutting marks on the back side is almost 3mm when running. I can exactly shoot the 2 corners, upper left and lower right, but the two sides does not fall correctly. This problem occurs for large paper sizes especially SRA3.

I have replaced already the registration unit but not good.

Anyone encountered this problem?


05-09-2013, 06:44 AM
My crystal ball went out for an oil change. What's the machine type?


05-09-2013, 06:58 AM
The model is bizhub 1051... Sorry I didn't mention it in my post a while ago

05-09-2013, 09:52 AM
adjust your zoom and loop...

may be getting some shifting.

Does this happen from all trays or just PF?

05-09-2013, 11:22 AM
The paper comes from tray1&2 only, no PF.
I can shoot the registration on the first page but when I run multiple pages, there is a shift of about 2mm
There is also a skew in the upper portion of the paper

Custom Search