PDA

View Full Version : C352 too much paper buckle?


Custom Search


Solotime
05-09-2013, 02:41 PM
Have a C352 that seems to have too much paper buckle. Only on Tray 2 and the LCT. When feeding from those 2 trays you can hear the paper crinkling as it goes up the vertical transport and when it comes out it has a slight "fold" line across the page. Tray 1 is fine. I am thinking that there is a separate adjustment for paper buckle that affects Tray 2 and the LCT? If anyone has seen this before and can suggest something I would appreciate it. I have looked thru the service mode settings and must have missed it.
Thanks

Solotime
05-09-2013, 02:46 PM
Nevermind, I found it! Tray 2 - 4 was set to +8 for some reason. Changed back to zero and all is well.

Custom Search