dbrownlee
12-15-2005, 04:24 PM
Debating picking up an off-lease Tos estudio 210c to sell to a customer about 1 hour away. Anybody have any opinions of copy quality, reliability, serviceability of this box? Any input would be appreciated. Thanks
View Full Version : Toshiba e210c
Custom Search
xiophyte
08-02-2007, 07:36 PM
Hey,
We have one of these in our office. I can say that the copy quality is pretty good, and the functionality is also good. I'm not too sure about the serviceability though.
Hope this helps
We have one of these in our office. I can say that the copy quality is pretty good, and the functionality is also good. I'm not too sure about the serviceability though.
Hope this helps
mckinley
08-02-2007, 07:41 PM
CQ is great if it's properly serviced.
fuser gears are sh*te, they wear out faster than a set of champ car tyres.
the dev units are driven via the mixer auger inside them ( which is made of plastic as is the end part where the drive gear is ) you only have to blow on that gear & the end of the auger snaps off ;) then it's " oops, yer machines a bit broke "
but having said all this, i love these machines as i have many of em to look after & if you put a fiery on them, they are even better.
fuser gears are sh*te, they wear out faster than a set of champ car tyres.
the dev units are driven via the mixer auger inside them ( which is made of plastic as is the end part where the drive gear is ) you only have to blow on that gear & the end of the auger snaps off ;) then it's " oops, yer machines a bit broke "
but having said all this, i love these machines as i have many of em to look after & if you put a fiery on them, they are even better.
Custom Search
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.