Mattdlam
05-14-2013, 09:11 AM
Hi there,
I am having an issue with abizhub pro 920 the machine continuosly gives a an S35-01 TROUBLE OCCURED, I have replaced the thermistors 1 to 4 and set the DIPSW3-1 to 0 when i restart the machine it starts up ok and when trying to print it warms up then gives the error again, i have double checked the thermistors and the lamps all seem ok as I replaced with new ones but the error does not go away. Your assistance will be greatly appreciated.
Please note I am new to Konica Minolta so pardon my questions if they sound silly, I recently started working on KM machines from HP.
I am having an issue with abizhub pro 920 the machine continuosly gives a an S35-01 TROUBLE OCCURED, I have replaced the thermistors 1 to 4 and set the DIPSW3-1 to 0 when i restart the machine it starts up ok and when trying to print it warms up then gives the error again, i have double checked the thermistors and the lamps all seem ok as I replaced with new ones but the error does not go away. Your assistance will be greatly appreciated.
Please note I am new to Konica Minolta so pardon my questions if they sound silly, I recently started working on KM machines from HP.