PDA

View Full Version : C6501 C-0213


Custom Search


NiklasT
05-15-2013, 01:36 PM
Hi Copy friends
I have a problem with C6501 Code C-0213
I changed Exit roller assy. But i can not see the motor turning anyway.. (The paper jam every time)
Do you think i must change AC DRIVER CARD??

Niklas T/ Sweden

Setright
05-16-2013, 03:37 PM
Hejsan!

Exactly how much did you replace? There are some one-way clutches hiding the gears, and these might be defective.

You can run the motor using I/O check mode, and if you also remove any finishing equipment you can see if it actually is turning.

NiklasT
05-16-2013, 04:05 PM
Hi Setright
I checked the motor in I/O Mode. The motor was not turning at all.
I also checked the one way cluthes and also replaced 2 of them.
Nothing worked. But after i changed the Ac Drive Board. The machine work... Jippi
I took the Ac Drive Board from a C6500. It was the same board as C6501 (A03UH52002)

Thank you for the reply
Niklas T/Sweden

JustManuals
05-16-2013, 08:34 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search