PDA

View Full Version : Metal Plate Identification (C253)


Custom Search


Hacky
05-21-2013, 10:26 AM
Hi all,

I do realize this is a long shot, but here goes..

Recently I've been tasked with removing a blockage in the toner conveyance section of a C253. That in itself is a ridiculously complex task as I've pretty much had to take the copier back to the shell to allow me access to the very center of the machine.

So whilst carrying out this task I've been documenting everything I take off in order to help with the reassembly, which has in fact been reasonably helpful.

Until now however..

I seem to have not made any note, or gathered any pictures of 1 particular metal plate and for the life of me I can not seem to work out where it should go. As I said before I know its a long shot, but I thought it would be worth a try posting some pictures to see if anybody on here has any clues as to where it goes.

Firstly this is the state the machine is currently in..

20789

And then the plate..

20790207912079220793

Hopefully those pictures will spark some ideas from some of you..

Thanks in advance!

Hacky

Gaffers01
05-21-2013, 11:14 AM
Hi,

Its in the parts manual under REAR FAN SECTION Page 51.

Hacky
05-21-2013, 01:33 PM
Hi,

Its in the parts manual under REAR FAN SECTION Page 51.

Oh wow, I went through the PM top to bottom several times last night and found nothing *facepalm*

Appreciate the response, the part is now back on the machine!

Thanks!!!!!!!

Custom Search