PDA

View Full Version : BH-C-451 with FS-608 + Punchkit


Custom Search


Hansoon
05-24-2013, 01:26 PM
BH-C-451 with FS-608 + Punchkit.

Have not seen the machine myself yet but the customer informed me that the dies of the punchkit are staying down blocking the paper path.

When manually turned up the dies are coming down again as soon as the machine is being operated.

Have no great experience with this finisher, any hints please?

Hans

knightfall
05-24-2013, 01:42 PM
sometimes the dies are held in place because of piece of paper in the dies, try lubricating dies with light oil or wd40.

Hansoon
05-24-2013, 02:14 PM
Thanks Knightfall, according to the customer (a copyshop with some knowledge about MFP's) a replacement punchkit gives the same problem.

Hans

Custom Search