PDA

View Full Version : Bizhub Pro 1200p Image Shifting


Custom Search


didspip
05-25-2013, 07:54 AM
Hi all, I have a Bizhub Pro 1200p that is experiencing Image shift problems in the crosswise direction not feed direction. KM have been involved with this but no solution yet. All trays are centred and all units level. Just about all the ADU registration components have been replaced including the centring sensor. Centring is turned off in both User and Service mode but still we get a 3-4mm shift intermittently through a print run. To start with is anyone else experiencing this? :confused:

JustManuals
05-25-2013, 07:08 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Connection Problem (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search