DigiMan
06-19-2013, 08:40 AM
Good morning eveyrone!
I have a problem with a 1051,the machine pops error code C-3102 which refers to Fuser pressure release motor(M33) or fusing pressure home sensor(PS58) or PRCB.
The customer states that it doesnt pop if he sents a print of say 1k pages or more of same paper(as in weight) but it pops while printing jobs that differ in paper weight.I changed the sensor thinking it might gone bad and checked all the gears that are involved in the fuser and they seem working well,at least when turning them by hand,but the code keeps coming back.Missing something obvious here?Am gonna change motor as my next action but i though i could ask you gurus for some insight :D
Thanks a lot in advance!
I have a problem with a 1051,the machine pops error code C-3102 which refers to Fuser pressure release motor(M33) or fusing pressure home sensor(PS58) or PRCB.
The customer states that it doesnt pop if he sents a print of say 1k pages or more of same paper(as in weight) but it pops while printing jobs that differ in paper weight.I changed the sensor thinking it might gone bad and checked all the gears that are involved in the fuser and they seem working well,at least when turning them by hand,but the code keeps coming back.Missing something obvious here?Am gonna change motor as my next action but i though i could ask you gurus for some insight :D
Thanks a lot in advance!