PDA

View Full Version : Bizhub Pro951/FS-532 finisher


Custom Search


scottybbb
06-26-2013, 07:56 PM
Just curios if anybody is having stapling issues with FS-532 finisher connected to a bizhub 951.I have had to replace motor M5 and belt in stacker unit.I am know having stapling jams again.Ordered finisher main board.

MVPunisher
10-11-2013, 04:36 PM
Any luck with this??? I have 3 machines in field and intermittently get staple jams on all 3, mostly 7224 and 7220. The few times I saw it it seemed like the belt timing was out of whack. Get a few more jams within a short period then it corrects itself for a bit....

You can adjust the gear position in reference to the belt position but see nothing that tells us the correct position...

Custom Search