View Full Version : can't find default admin password of web tools for C25
hello there
I was installing a C25.when i tried to set up the registration for the scan to SMB I could'nt find a way from the copier so I tried to do it from the web tools.but I tried various passwords for adminstrator but to no avail.I tried 000000(AS THE ADMINISTRATOR PASSWORD on the copier),12345678,sysadmin,92729272.can somebody tell me what it is?
wseyller
06-27-2013, 02:48 AM
I'm pretty sure it is "administrator"
Haaland
06-27-2013, 01:34 PM
Tried blank?
not sure if it is the C25 or C35 that doesn't have any password at the web-interface.
oldschool
06-27-2013, 08:48 PM
I don't know if this would work but some newer bizhubs have an admin password of 1234567812345678.
JustManuals
06-28-2013, 09:59 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
EarthKmTech
06-29-2013, 02:38 AM
also be aware there is a password retry limit for the web interface on km machines.
after so many failed attempts the password will be rejected regardless even if it is correct until a cold restart of the machine.
afaik the password is administrator on the c25
There is no default password for the admin account on a bizhub 25, you will need to create a password: "admin' or '12345678', or whatever. I had this problem on a secure network before.
you will need to create a log-in for the administrator account.
EarthKmTech
06-29-2013, 04:53 AM
This was not my experience when I installed a new c25 2 weeks ago after giving the machine an IP address and then connecting to the web interface to configure the rest.
wseyller
06-29-2013, 05:01 AM
This was not my experience when I installed a new c25 2 weeks ago after giving the machine an IP address and then connecting to the web interface to configure the rest.
It is indeed "administrator" for access webpage.
On the copiers control panel it is "000000"
I've connected a few of these myself
It is indeed "administrator" for access webpage.
On the copiers control panel it is "000000"
I've connected a few of these myself
yeeeesss,I confirmed with konica minolta,and 'administrator' it is.thanks mate.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.