View Full Version : C654 ERROR CODE 7219
Kenny
07-02-2013, 11:26 AM
Morning chaps have a Konica Minolta c654 bringing jam code 7219 ? anyone seen this before ?
thanks
Kenny
Avskrap
07-02-2013, 12:09 PM
Jam codes beginning with 72xx is a FS jam code. What FS is mounted on the machine? What are the symptoms? Paperweight? Folding?
blaze2000
07-02-2013, 12:26 PM
Check the bypass switching gate solenoid in the finisher it might be dead or have a broken spring. We also had one have a board failure causing intermittent jamming but I don't recall if it was a 72-19, good luck
Replace SD2 (p/n A11PR70211).
EarthKmTech
07-02-2013, 01:09 PM
presuming its FS-535, if yes, it is the bypass gate solenoid spring broken. VERY common on this and FS-526.
Done it MANY times now.
JustManuals
07-02-2013, 07:41 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Albertoner
06-19-2017, 07:30 PM
Thanks man, i try it tomorrow.
See you
blackcat4866
06-19-2017, 11:06 PM
Is it a FS-534? Maybe this will help:
http://www.copytechnet.com/forums/konica-minolta/104455-fs-534-alignment-plate-wearing.html
=^..^=
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.