PDA

View Full Version : Jamming Bizhub colour C280 jams code 32-05


Custom Search


tekkie
07-03-2013, 07:06 PM
Machine jams intermittently more on A3 than A4 and it doesnt matter which cassette A3 is fed from, it jams from both cassettes.When it jams the paper is concertinered it has fed a few inch through the fuser rollers then stops and crunches up.Its not fouling or catching anything the lead edge is perfect and has fed through rollers and then it seems to stop and the paper crunches up behind it.It has done 150k in total has had a new fuser unit about 80k ago due to damaged rollers and it has latest firmware.Any ideas anyone.Ive changed the fuser exit sensor and checked its operation in service mode and its ok.

JustManuals
07-03-2013, 07:48 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

blaze2000
07-03-2013, 08:09 PM
Do you have a finisher installed?

blaze2000
07-03-2013, 08:17 PM
check out bulletin 7587 ...


7587.pdf Download

Guide_Replacement_Procedure.pdf Download

Parts_Mod_Notice-Fuser.pdf

tekkie
07-03-2013, 08:52 PM
no finisher installed
the model i have is an olivetti dont have access to konica bulletins can you supply info pls

blaze2000
07-03-2013, 10:00 PM
ok here's the info....

blackcat4866
07-04-2013, 12:31 AM
Jam code?

Custom Search