View Full Version : Bizhub c652 Blurry copy
I got 2 bizhub c652 that every 5-6 weeks sometimes longer start printing blurry copies. Colour reg out. I clean the IDC sensors,lazer glass.The solids are all good so the copier can see the pattern when it does colour reg. Belt is fine too. Will U/G firmware in the next few days. Is there something else that can be done? Any help much appreciated.
officesrl
07-08-2013, 04:53 PM
Try to clean 2 IDC sensor, under the transfer belt. Remove the belt, and near the plate that fix the belt, there are two sensor IDC
JustManuals
07-08-2013, 10:05 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
PeterG
07-09-2013, 12:16 AM
What is the climate like?
We have issues like that during winter, due to condensation.
Normal office temperature. Ho hotter or colder than any other office.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.