PDA

View Full Version : Konica Bizhub C353 Black Skew Adjustment?


Custom Search


Oscar57
07-10-2013, 05:17 PM
Hi,

Does anyone know if you can adjust the skew on the black PH unit? I replaced the black PH unit and now the black is off from the CMY colors. Or do I have to adjust the skew on the CMY to match the Black?

JustManuals
07-10-2013, 06:25 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

NRTech
07-10-2013, 08:11 PM
the c, m, y heads have manual adjustment, the black head doesn't. the colour heads use the black head as reference for calibration. there's a good chance the black head isn't in correctly. try refitting it first, then calibrate the colour heads as per the manual. whilst you're at at, make sure the IDC sensors under the transfer belt are clean.

PeterG
07-11-2013, 01:34 AM
What NRTech said.

princef18
07-11-2013, 09:53 AM
the c, m, y heads have manual adjustment, the black head doesn't. the colour heads use the black head as reference for calibration. there's a good chance the black head isn't in correctly. try refitting it first, then calibrate the colour heads as per the manual. whilst you're at at, make sure the IDC sensors under the transfer belt are clean.

Same reply! :cool:

Custom Search