View Full Version : Bizhub 751 banding issue
cap0319
07-10-2013, 07:55 PM
Our 751 is giving a single half inch black band across the page. print or scan we get the same band. The developer is admittedly overdue to be replaced but I don't believe it would cause this type of issue.
I've checked the drum, charge unit, web and fuser and all appear to be just fine so I was wondering if anyone had any more insight?
PeterG
07-11-2013, 01:32 AM
Please supply scanned image.
JustManuals
07-11-2013, 03:01 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
princef18
07-11-2013, 09:28 AM
Can we see a scanned image of the copy? Thanks
copier addict
07-15-2013, 02:37 PM
Make sure the charge cleaner is in proper position.
SmellsHot
07-15-2013, 06:15 PM
He did say "scanned" right? Then the engine has nothing to do with your problem.......
Zackuth
07-15-2013, 10:29 PM
Take the platen off and clean the white strip underneath the glass. This might solve the problem. I would also look at the mirrors as well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.