View Full Version : Jamming bizhub c25 constantly jamming onduplex
malthus
07-17-2013, 03:07 PM
I have bizhub c25 constantly jams indouble sided mode have tried changing boards main motors sensors but the paper is not fed back in for second side and registers an output jam both clutches have also been changed
any one have any ideas
JustManuals
07-17-2013, 03:41 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
malthus
07-17-2013, 05:18 PM
[QUOTE=JustManuals.com;368590]This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
[malthus/QUOTE] dont need any manuals have full access to infohub
Kevin12
06-13-2016, 02:56 PM
I have bizhub c25 constantly jams indouble sided mode have tried changing boards main motors sensors but the paper is not fed back in for second side and registers an output jam both clutches have also been changed
any one have any ideas
Hi
Did you manage to sort this problem out?
copier tech
06-13-2016, 03:06 PM
I expect so as it was nearly 3 years ago!
guycampo
10-08-2018, 05:03 PM
I expect so as it was nearly 3 years ago!
What did you do to fix it? I have the same problem and I went thru the same exact replacement of components.
Thank you
GC
JR2ALTA
10-08-2018, 10:43 PM
What did you do to fix it? I have the same problem and I went thru the same exact replacement of components.
Thank you
GC
You might have a gap between the idle and drive rollers. Had this problem, brought into shop and found that plastic door wasn't snapped in probably to duplex section. It was a long time ago, i think it was a c25 or comparable
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.