View Full Version : Miscellaneous bizhub 223 not counting duplex through key counter
oldschool
07-18-2013, 09:22 PM
I've searched the manual but I cant seem to find the setting that tells a bh 223 to send a pulse to the key counter for the second side of a copy. I have a vague recollection of this being one of those "not mentioned in any manual" dip switches.
Any ideas as to where this setting is?
TheOwl
07-18-2013, 11:47 PM
I am guessing that you are using one of the Vendor Modes within the machine.
I haven't played with Vendor Modes in quite some time, but from memory would couldn't double side because of this exact reason.
JR2ALTA
07-18-2013, 11:56 PM
The Billing Mode is an extra code you input immediately after entering service mode.
There you can change the clicks for ledger
rrrohan
02-05-2023, 01:30 AM
its been ages but i recall there are 2 modes for count
i think 1 is from paper pickup and one is for exit
exit would allow for duplex count and not charging for jams
JR2ALTA
02-09-2023, 12:29 AM
Thanks for the "Like" Allan. LOL. Almost 10 years ago, my wisdom has stood the test of time.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.