PDA

View Full Version : Error Code Konica Minolta Bizhub pro c500 - color registration problem. Need advice.


Custom Search


Manipula
07-24-2013, 11:07 PM
Hi Guys;
I have a problem with the intensity of color toner and centering.
The Auto color adjustment shows an error 2.
I can not do manual color adjustment, after printing the crosses, the machine does not want to scan the page. Is there a manual centering the X axis and Y? The gamma adjustment 1 shows SC 29-08.
Corona wires are fresh, all CMYK drums as well.
Developers have two weeks. But I replaced them manually - opening Dev unit - spilling old and pouring new.
Slowly losing my temper on this machine. Could someone lead me in the direction of the correct calibration (toner density and color matching)?


Thank you for any help, Peter.

JustManuals
07-24-2013, 11:52 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search