PDA

View Full Version : Error Code C-8000


Custom Search


Saghir377
07-30-2013, 06:49 AM
Hi good morning to hope you are all fine.
Dear i have one machine C-8000 its having color registration problem come time become ok but some time error code 4661 & 4662 some time 4521.
I replace idc sensor shutter but same. I replace int.transfer belt it works for 2 days ok now again same. when i adjust Color registration some time ok some time Error 1 & error 2.
Kindly check if somebody can help me

Mick01
07-30-2013, 11:41 PM
Your issue will most likely be the registration shutter binding. Make sure that all the moving parts that drive the shutter are clean and not binding.

JustManuals
07-31-2013, 12:53 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

SCHWARZ
07-31-2013, 05:34 AM
Try cleaning the encorder assy and sensor board assy on drum drive CMYK. And clean sensor PWB assembly on belt drive.

Custom Search