PDA

View Full Version : KM 4050 status on display


Custom Search


Donnie
07-31-2013, 02:44 PM
We bought a 4050 from a wholesaler, it has the current job status on display. A big arrow that points to current job statistics and counts down pages. It is not the status screen that shows when you press status button. Kyocera hotline had no info on this. Does anyone know anything about this. I have customers who would really like this feature. Thanks.

blackcat4866
08-01-2013, 02:05 AM
Are you talking about the Accessibility function? My enduser called it " ... the simple button for simple users." =^..^=

Donnie
08-01-2013, 02:54 AM
No, it is not the simple display. It's a different screen entirely. It gives all of the information about the current job on one half of the display, with an arrow in the middle pointing to the number of pages input and counting . It basically gives you the info resembling a falcon 2. We have never known how to view this on a falcon 3 without pressing the status button. Thanks for your interest.

blackandwhite
08-01-2013, 06:41 PM
can you post the screen shot ....

Donnie
08-02-2013, 10:10 PM
Here is a picture of the display.21623

GUNit
08-05-2013, 04:22 PM
if my memory serves me correctly go into system menu then under the copy heading look for priority reservation then enter that and switch it off/on, its along those lines same as ta250ci. hope this helps.

Donnie
08-05-2013, 05:41 PM
if my memory serves me correctly go into system menu then under the copy heading look for priority reservation then enter that and switch it off/on, its along those lines same as ta250ci. hope this helps.
Bingo. Thanks so much.

Custom Search