PDA

View Full Version : Konica Minolta Bizhub C253 Magenta


Custom Search


Alex1
08-26-2013, 04:09 AM
I have a Kinica Minolta Bizhub C253 I'm doing magenta sky shots to see the density of the magenta imaging unit. I'm getting a lot of white spots in the prints any reason to the cause?

Blizzoo
08-26-2013, 03:33 PM
How is the state of the Mg IU?the chis is reseted?
Check the electric contatcts of the unit,test with another one if you have the posibility.
Could you post a scan of magenta pattern?

Alex1
08-26-2013, 04:05 PM
How is the state of the Mg IU?the chis is reseted?
Check the electric contatcts of the unit,test with another one if you have the posibility.
Could you post a scan of magenta pattern?


I see if I can figure out how to post with a scan lol I'm new at this!

cokwax
08-26-2013, 07:13 PM
I see if I can figure out how to post with a scan lol I'm new at this! Type your post and scroll down to Attachments (under Additional Options), Click manage attachments. U can figure out the rest from there.

copier addict
08-27-2013, 12:22 AM
Why are you doing skyshots to check density? Why not use service mode to do it?

wseyller
08-27-2013, 12:30 AM
Why are you doing skyshots to check density? Why not use service mode to do it?

Same thing I was thinking. In service mode go to test mode then halftones.

Sent from my Galaxy Nexus using Tapatalk 2

Hansoon
08-27-2013, 08:26 AM
Agree, half tones say much more about the quality of components.

Hans

Alex1
08-27-2013, 03:33 PM
Agree, half tones say much more about the quality of components.

Hans

I did sky shot because I had a bit of trouble remembering to do half tones. I would agree it will give a better result.

Custom Search