Pl Help me about Fiery Clone tool

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chadson
    Technician
    • Aug 2013
    • 34
    #1

    [Dead] Pl Help me about Fiery Clone tool

    hi all

    I also Fiery server...failed (Code FF)...OS....but now i want install new OS...i have a HDD OS before...but i am not used to Fiery clone tool....i did burn a CD version 1.6....when i insert CD ...appear command line ...i don't know do next step....no appear graphic like FCT guide...
    Pleas help

    My English very bad...i hope so...any one see me

    Thank you guy help me....
    Last edited by chadson; 08-26-2013, 08:59 AM.
    Tags: bad, fiery, guide, hdd, install, line, server, stall, version
    • Saghir377
      Technician
      • Feb 2013
      • 47
      #2
      Re: Pl Help me about Fiery Clone tool

      Dear fallow the steps it will makes easy for you

      What kind of fiery u have.
      If you have if you have EFI ic306 then you only need cd 1 System software cd 2 user software
      It is very easy put 1st cd & fallow display then after some time it will ask for cd 2 and then will ask for restart some steps it will show u in display.

      2nd and easy way take out hard disk from fiery there r three partitions format one by one. and make copy from any working fiery and past them in to the same partition. it will work.
      kindly put all detail of your problem. leave this clone tools that r nothing

        Comment

        • wseyller
          Service Manager
          1,000+ Posts
          • Sep 2012
          • 1129
          #3
          Originally posted by chadson
          hi all

          I also Fiery server...failed (Code FF)...OS....but now i want install new OS...i have a HDD OS before...but i am not used to Fiery clone tool....i did burn a CD version 1.6....when i insert CD ...appear command line ...i don't know do next step....no appear graphic like FCT guide...
          Pleas help

          My English very bad...i hope so...any one see me

          Thank you guy help me....
          I never seen a command line with FCT. Can you provide a screen shot.

          Sent from my Galaxy Nexus using Tapatalk 2

            Comment

            • Mick01
              Trusted Tech
              250+ Posts
              • Nov 2012
              • 362
              #4
              Re: Pl Help me about Fiery Clone tool

              If the RIP is giving "FF" error it is likely to be an IC-408 (small EFI controller screwed to the back of the C6500/01)
              Fiery Clone Tool will not work with this controller (server type EFI controller app only i.e ic303/305)
              There are two ways of updating the system software in an IC-408

              1) USB stick. The system software can be loaded onto a USB stick (I suggest minimum size 8gig but 4gig may work). USB prep tool software needs to be loaded onto a computer and used to copy the system software from the "system software" DVD to a USB stick. Once this is done the IC-408 is switched on with the USB stick inserted into the IC-408. The software will be copied from the USB stick into the IC-408 and loaded.


              2) Directly from Computer to the IC-408. Connect the computer to the IC-408 via cross over cable. Insert the IC-408 System software disk and run the installer program. Follow the instructions on screen to complete.

              Hope this helps

                Comment

                • chadson
                  Technician
                  • Aug 2013
                  • 34
                  #5
                  Re: Pl Help me about Fiery Clone tool

                  Originally posted by Mick01
                  If the RIP is giving "FF" error it is likely to be an IC-408 (small EFI controller screwed to the back of the C6500/01)
                  Fiery Clone Tool will not work with this controller (server type EFI controller app only i.e ic303/305)
                  There are two ways of updating the system software in an IC-408

                  1) USB stick. The system software can be loaded onto a USB stick (I suggest minimum size 8gig but 4gig may work). USB prep tool software needs to be loaded onto a computer and used to copy the system software from the "system software" DVD to a USB stick. Once this is done the IC-408 is switched on with the USB stick inserted into the IC-408. The software will be copied from the USB stick into the IC-408 and loaded.


                  2) Directly from Computer to the IC-408. Connect the computer to the IC-408 via cross over cable. Insert the IC-408 System software disk and run the installer program. Follow the instructions on screen to complete.

                  Hope this helps
                  please give me link software IC408....let me get it....

                    Comment

                    • TheOwl
                      Service Manager
                      Site Contributor
                      1,000+ Posts
                      • Nov 2008
                      • 1733
                      #6
                      Re: Pl Help me about Fiery Clone tool

                      If you have access to another controller which is the same, then the easiest way is to use something like Acronis or Ghost and clone the HDD in the good controller.

                      From there, simply apply that image to the controller needing the system install and then reconfigure it to the correct settings.
                      Please don't ask me for firmware or service manuals as refusal often offends.

                        Comment

                        • mrwho
                          Major Asshole!
                          Site Contributor
                          2,500+ Posts
                          • Apr 2009
                          • 4298
                          #7
                          Re: Pl Help me about Fiery Clone tool

                          I had good results with Clonezilla (free and opensource) to copy the Fiery data from one HD to another. Worked fine the first time around, and without spending any additional money. How cool is that?
                          ' "But the salesman said . . ." The salesman's an asshole!'
                          Mascan42

                          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                          Ibid

                          I'm just an ex-tech lurking around and spreading disinformation!

                            Comment

                            • chadson
                              Technician
                              • Aug 2013
                              • 34
                              #8
                              Re: Pl Help me about Fiery Clone tool

                              Originally posted by TheOwl
                              If you have access to another controller which is the same, then the easiest way is to use something like Acronis or Ghost and clone the HDD in the good controller.

                              From there, simply apply that image to the controller needing the system install and then reconfigure it to the correct settings.
                              i used to ghost normal....but it not worked....im not.yet try acronis....

                                Comment

                                • TheOwl
                                  Service Manager
                                  Site Contributor
                                  1,000+ Posts
                                  • Nov 2008
                                  • 1733
                                  #9
                                  Re: Pl Help me about Fiery Clone tool

                                  When you say it didn't work, what happened exactly.

                                  If your software is failing to image a drive, there could be a couple of things going on there such as the drive is stuffed or you may have a bad image file.
                                  Please don't ask me for firmware or service manuals as refusal often offends.

                                    Comment

                                    • jpablo_mza
                                      Technician
                                      • Jun 2018
                                      • 28
                                      #10
                                      Re: Pl Help me about Fiery Clone tool

                                      Dear, I need the version 2.0 of that fiery (Pro80), I lost the discs and xp does not start, someone will have the images ?? Thank you very much for your help

                                        Comment

                                        Previous template Next
                                        Working...