PDA

View Full Version : Bizhub 920 tray issue


Custom Search


ck1
09-03-2013, 08:36 AM
I have one unit 920 all tray show 8 1/2x13 can switch to A4. have any setting ? thanks

blackcat4866
09-04-2013, 12:27 AM
Have you checked?: Paper Setting > select tray > Change Setting > then select the appropriate size, color, media type, etc. =^..^=

ck1
09-04-2013, 01:51 AM
Have you checked?: Paper Setting > select tray > Change Setting > then select the appropriate size, color, media type, etc. =^..^=
yes.. but i can't select the A4 size :confused: any setting ?

methogod
09-04-2013, 12:27 PM
have to look at a machine today...

but try

tech rep mode

system input

size setting

something should be there...


A4 vs 8.5x11

Mick01
09-05-2013, 05:55 AM
Could there be a chance you have US firmware loaded into the machine? I would try feflashing the EU firmware.

ck1
09-06-2013, 01:49 AM
Could there be a chance you have US firmware loaded into the machine? I would try feflashing the EU firmware.
Oh my god... this machine is US version ??? thanks i will check it , thanks ( But i all tray can change to A4 :confused:)

Custom Search