View Full Version : Bizhub 600 2nd side paper flying ( image blur )
when use duplexing , the 2nd page fly to touch the drum separater ( No Jam ) .i change the c.wire but still problem .Any ideal or setting for charging unit ? thanks
Mick01
09-05-2013, 05:59 AM
Can you please clarify what you mean in regards to Charge? i am assuming you mean the separation corona wire, not the charge wire. Is this correct?
Most likely this is a paper curl issue, not machine issue, try loading the stock short edge feed and try. Try another stock in the machine.
Can you please clarify what you mean in regards to Charge? i am assuming you mean the separation corona wire, not the charge wire. Is this correct?
Most likely this is a paper curl issue, not machine issue, try loading the stock short edge feed and try. Try another stock in the machine.
Put landscape no thing issue ....
Mick01
09-05-2013, 07:45 AM
OK if i understand you correctly short edge feed is no problem. try another brand of paper or a fresh ream of the paper you are currently using.
OK if i understand you correctly short edge feed is no problem. try another brand of paper or a fresh ream of the paper you are currently using.
Ok thanks i will try
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.