View Full Version : Konica 7020
kontech
02-03-2006, 10:19 AM
Hi, I have a Konica 7020 with the error code F46-10. Who had this error already once and which I can do against it?
Thanks
kontech
dbrownlee
02-03-2006, 01:27 PM
Expo lamp error. Check lamp, fuse, etc. Also carraige travel. If happens at power up, Konica says probably main control board.
Model: 7020
Solution ID: 92091
Type:
Created: 09-20-2000 at 16:56:17
Last Modified: 09-23-2000
Description:
F46-10 at power up.
Solution:
CAUSE: The main CB failed.
SOLUTION: Replace the main CB (p/n 26NA-9301).
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.